Do you have a beloved car you can’t bear to part with? Those marks can make your car feel at home, even if it has a few scratches and dings. But what do you do when unsightly car scratches start adding up and becoming an eyesore?Instead of spending hundreds or even thousands of dollars on professional car scratch repairs, follow these simple DIY steps to fixing vehicle paint scratches by Courtesy Buick GMC, serving Bessemer, AL, USA.With a little time and effort, those marks will be gone for good. So get started and give your car the TLC it deserves!Material for Light Scratches:
• A can of spray paint that matches your car’s color• A few sheets of sandpaper (2000 grit or higher)• A polishing compound• A clean clothMaterial for Deeper Scratches:
All of the above materials, plus…• A putty knife• Body filler• A small paintbrushFixing Light Scratches:
Deep Cleaning Around the Scratches:
To begin, clean the vicinity surrounding the scratch with soapy water and a soft cloth. Wipe any dust off with a clean cloth. Then, dry it off completely.Sand it with a Sandpaper:
If the scratch is light, you can begin by sanding it lightly with 2000 grit sandpaper. Be sure to use circular motions and apply even pressure while sanding. Applying a Coat of Spray Paint:
Next, apply a few thin coats of spray paint to the area, letting each coat dry for about 30 minutes before applying the next. Be sure to sand lightly between each coat.Applying the Polishing Compound:
Finally, apply a polishing compound to the area and buff it out until the scratch is no longer visible.Fixing Deep Scratches:
Fill in Automotive Filler:
First, use a putty knife to fill the scratch with automotive filler. Take care not to overfill the scratch. This step is crucial because it will influence how well the paint job lasts.Sanding the Filler:
Follow the guidance on the can and apply several thin coats of paint, allowing each to dry fully before applying the next. Again, use circular motions and apply even pressure while sanding. Make sure the filler is completely smooth before moving on to the next step.Applying the Base Coat of Paint:
Now it’s time to apply paint to the area. Use a brush or roller specifically designed for automotive painting for best results. If you wish to apply two coats of paint, follow the directions on the can. Applying the Clear Coat:
After the base coat is as good as dry, apply a clear coat to protect the paint and give it a glossy finish. Follow the same directions as for the base coat, applying several thin coats and allowing each to dry entirely before moving on to the next. Wax and Polish:
To make your paint job sparkle, give it a good wax and polish. It will also help to protect the finish. Choose a high-quality automotive wax and follow the directions on the can. For best results, use a power polisher to make the wax shine.It’s time to end those unsightly paint scratches on your car. With some elbow grease and these helpful tips, you can have them gone for good!No problem if you don’t feel comfortable removing the scratches yourself. Courtesy Buick GMC is here to help. We offer various services that will take the hassle out of getting your car to look new. Schedule an appointment today. We’ll be waiting!
Connect with us
